Join our mailing list!






You are here: Home > Retro/ Alternative
Retro/ Alternative
  Twin Fang
  Quad Fang
  The "Bullet" Single Fin
  Single Twin
  6 Channel Single Fin
  Performance Twinner
  Circa '86
  RJ Trawler [Displacement Hull]
Sort By:
Page of 1  
6 Channel Single Fin
"Sickle" 6 Channel Single fin: 6'1" x 18 3/8" x 2 1/4"
Our Price: $699.00

Share

"Sickle" 6 Channel Single Fin
This board has the free riding drive of a retro single fin combined with the performance features of a modern board. It uses a flat bottom with double barrel concaves under the front foot and channels out the back for speed and drive. The progressive rocker allows for modern style top-to-bottom surfing. If you like the feel of drawing clean, long-driving bottom turns then you will love this board.



Product Specs:
Dimensions: 6'1" x 18 3/8" x 2 1/4"
Tail Shape: roundpin
Construction: polyester
Fins: single fin, fin sold separately
Twin Fang
Twin Fang: 5'10" x 20 3/4" x 2 1/2"
Our Price: $680.00

Share

Twin Fang
You see a lot more of these weird little boards in the lineup these days…..and they’re back `cause they’re fast. This is an updated version of the original “Fish” design. I’ve incorporated a modernized single-to-double concave-to-accelerated spiral vee bottom, and blended it with the original retro outline, flat deck and full rails...why? - for the enjoyment of hair raising speed runs.
I recommend riding this board eight inches shorter, two inches wider and 1/8” thicker than you regular shortboard dimensions.
Also available: with quad fin setup, or in the “Proxy” (custom flexible epoxy) construction.
Graphics: wide open


Product Specs:
Dimensions: 5'10" x 20 3/4" x 2 1/2"
Tail Shape: deep swallow
Construction: polyester
Glassing: resin opaque top & bottom with white pinline, Gloss & Polish
Fins: comes with Future twin fins
Quad Fang Fish
Quad Fang: 5'3" x 20 1/4" x 2 1/4"
Our Price: $680.00

Share

Quad Fang (offspring of the Twin Fang)
The Twin Fang is now available with quad fin set-up….why….for hair raising speed arcs on rail. By adding another fin over on your rail, you increase the leverage placed on your fins when going into a turn; this equates to more drive and more speed when you put this puppy into drive – a beautiful thing. 

Ideal conditions: ankle high to shoulder high weak waves.

Experience: intermediate through advanced

Designed for: super speeding gutless junk

Product Specs:
Dimensions: 5'3" x 20 1/4" x 2 1/4"
Tail Shape: deep swallow
Construction: polyester
Fins: comes with Lokbox quad fins
Twin Fang
Twin Fang: 5'9" x 21" x 2 1/2"
Our Price: $680.00

Share

Twin Fang
You see a lot more of these weird little boards in the lineup these days…..and they’re back `cause they’re fast. This is an updated version of the original “Fish” design. I’ve incorporated a modernized single-to-double concave-to-accelerated spiral vee bottom, and blended it with the original retro outline, flat deck and full rails...why? - for the enjoyment of hair raising speed runs.
I recommend riding this board eight inches shorter, two inches wider and 1/8” thicker than you regular shortboard dimensions.
Also available: with quad fin setup, or in the “Proxy” (custom flexible epoxy) construction.
Graphics: wide open


Product Specs:
Dimensions: 5'9" x 21" x 2 1/2"
Tail Shape: deep swallow
Construction: polyester
Glassing: resin opaque top & bottom with pale yellow pinline
Fins: Glass-on Fins, twin
Circa '86
Circa '86: 6' 0 1/2" x 18 3/4" x 2 1/4"
Our Price: $605.00

Share

Circa '86
Can you believe there is actually an 80’s model…I’m feeling old. Actually, I was a grom in the 80’s and what a great time it was; in part due to board design – less work for more speed; surfing didn’t have to be so technical back then and it seemed like there were less knee injuries… I don’t know? Features flat deck, angled down rails, flat-to-vee bottom, even a beautifully hideous beek nose. So  here’s my quick, forgiving little gem that hearkens back to the days of Curren and Occy duals, “Kong”, “Rabbit”, “The Saint”, a young ”Butto”, “The Law”….yesterdays heroes that aren’t so different from today’s.


Product Specs:
Dimensions: 6' 0 1/2" x 18 3/4" x 2 1/4"
Tail Shape: diamond tail
Construction: polyester
Glassing: 4oz bottom, 4oz+4oz deck/  Direct Size cloth
Fins: comes with FCS Fins
Performance Twinner
Peformance Twinner: 5'10" x 19" x 2 5/16"
Our Price: $635.00

Share

Performance Twinner
A new version of a design from a classic era….yup, the MR reign. Using one of my  current rockers, a smoother transitioning forward outline, modern hull contours and a few different fin options, this board is a speedy wonderkind that is more versatile than it’s once-groundbreaking predecessors. By running a pretty flat rocker with a single-to-double-to-spiral vee bottom off the tail; you get a fast, free-riding screamin’ mimi. Fin options to run include: (1)large twins, (2)large twins with small trailer (3)twinzer, (4)thruster, or (5)thruster with little teeny twinzer/ turbulence blocker fins.

Ideal conditions: knee high to head high, mushy or hollow…works best on overhead and hollow days with thruster set-up.

Experience: intermediate through advanced.

Designed for: free-riding gull gaffs, and super-speeding needle threading



Product Specs:
Dimensions: 5'10" x 19" x 2 5/16"
Tail Shape: swallow tail
Construction: polyester
Fins:
comes with FCS Fins
The "Bullet" Single Fin: 6'1"
Our Price: $680.00

Share

The "Bullet" Single Fin
Some people say, “Man, I’m tired of wiggling….I’m tired of my board sticking….I wanna go fast, I wanna feel free to speed and arc out my turns where I wanna.” These same people also say, “I don’t want to think no more ‘bout having to surf technical and perfect in the pocket….and having my board punish me if I don’t…..someone gimme a bullet.”

Ideal conditions: knee high, mushy and blown to ribbons, to overhead glassy barrels

Experience: low intermediate through advanced

Designed for: fast, free single fin retro ripping with a twist of modernity thrown in.


Product Specs:
Dimensions: 6'1" x 19 3/4" x 2 9/16"
Tail Shape: dimaond tail
Construction: polyester
Glassing: resin swirl bottom wrapping rails with resin opaque deck
Fins: single fin, fin sold separately
Displacement Hull, RJ Trawler
RJ Troller [Displacement Hull]: 7'5" x 21 3/4" x 2 3/4"
Our Price: $945.00

Share

RJ Troller [Displacement Hull]
shaper description coming soon.

Skill Level: Beginner to Expert

Product Specs:
Dimensions: 7'5" x 21 3/4" x 2 3/4"
Tail Shape: round tail
Construction: polyester, Gloss & Polish
Glassing: resin swirl top & bottom
Fins: sold separately, Shaper's choice, 8.0" L-Flex, True Ames
Performance Twinner
Peformance Twinner: 6'0" x 19 1/4" x 2 5/8"
Our Price: $755.00

Share

Performance Twinner
A new version of a design from a classic era….yup, the MR reign. Using one of my  current rockers, a smoother transitioning forward outline, modern hull contours and a few different fin options, this board is a speedy wonderkind that is more versatile than it’s once-groundbreaking predecessors. By running a pretty flat rocker with a single-to-double-to-spiral vee bottom off the tail; you get a fast, free-riding screamin’ mimi. Fin options to run include: (1)large twins, (2)large twins with small trailer (3)twinzer, (4)thruster, or (5)thruster with little teeny twinzer/ turbulence blocker fins.

Ideal conditions: knee high to head high, mushy or hollow…works best on overhead and hollow days with thruster set-up.

Experience: intermediate through advanced.

Designed for: free-riding gull gaffs, and super-speeding needle threading



Product Specs:
Dimensions: 6'0" x 19 1/4" x 2 5/8"
Tail Shape: swallow tail
Construction: Proxy epoxy, team light performance glassing
Fins:
comes with Glass-on fins