|
|
|
|
 |
|
Greased Pig: 6'4" x 19 5/8" x 2 9/16"
|
Our Price: $605.00
|
|
|

Greased Pig Designed for performance surfing in between swells. Concaves all the way through…deepest at the fins… keeps it running fast in the small stuff. Stinger swallowtail makes for more pronounced hip and pivot point to release water and increase looseness. Uses boxy rails to push back in turns. Everything the high performance shortboards do in the good waves this board does in the crud. Ridden 3-4 inches shorter and 1/4" to 1/2" wider.
Todd will specify the variation on this design during order process. Formerly know as the "LeVee".
A speed machine for chest high waves and smaller; This is the type of board that you drive like a race car….it’s going fast so all you gotta’ do is hang on and steer. It has a low entry rocker for quick paddling, ease catching waves, and increased lift in small/ flatter faced waves. The bottom has a single concave that transitions into a pronounced spiral vee that carries off the tail. This hull design carries excellent trim speed and gives the tail a very free feeling in the small stuff. The rails are fuller and boxier with a forgiving edges that are softly blended into the bottom. You can ride this board 2-3 inches shorter, 1/2” – 3/4” wider, and 1/8” thicker than your standard shortboard.
Product Specs:
Dimensions: 6'4" x 19 5/8" x 2 9/16" Tail Shape: wide hip squash Construction: polyester Glassing: 4oz bottom & 4oz + 4oz deck Fins: FCS thruster set
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Four Leaf Clover Quad Fin: 6'2" x 19 1/2" x 2 1/2"
|
Our Price: $645.00
|
|
|

Four Leaf Clover Quad Fin What is better than a really drivey board that is still loose? – Nothing; that’s the perfect combo. The board featured here with the quad fin set-up is the perfect summertime board; fuller outline to power drive you through the small-scale stuff. The quad fin set-up is available on any shape, so don’t feel limited….go ahead and try it, you’ll like it. The key to the whole concept is the fin placement – No back fin reduces drag while the two side fins work with the rail line and rocker to throttle you through turns. Swap out your v-6 for a v-8 under the hood with a “FOUR LEAF CLOVER” quad-fin set-up.
Product Specs:
Dimensions: 6'2" x 19 1/2" x 2 1/2" Tail Shape: diamond tail Construction: polyester Glassing: 4oz bottom & 4oz+4oz deck Fins: comes with Future Fins
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Small Wave Destroyer: 5' 10" x 18 1/8" x 2 1/8
|
Our Price: $605.00
|
|
|

Small Wave Destroyer This is a fast running rail-to-tail board for waves ranging from knee high up to head high. It has a low entry rocker for quick paddling & early entry into waves. It has a smooth, flowing rocker bend from nose to tail; no nose or tail kick in the bottom curve. The wide point in the outline is moved forward which gives the board a fast driving, rail-to-rail, pockety feel even in the small stuff. It features a fuller nose & tail outline for increased lift & carry through flat spots.
Product Specs:
Dimensions: 5' 10" x 18 1/8" x 2 1/8 Tail Shape: rounded squash tail Construction: polyester Airbrush: blue Glassing: 4oz bottom & 4oz+4oz deck , Direct Size Cloth upgrade (increased strength to weight ratio) Fins: comes with FCS Fins
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Rascal II: 5'6" x 19 3/8" x 2"
|
Our Price: $605.00
|
|
|

Rascal II Yes,
you guessed correctly; the Rascal II is an offspring of the original
Lil’ Rascal. Don’t worry, it’s not meant to replace the trusty, tried
and true design of the original Rascal…. It started as just some
thoughts…..ideas for a new board design after contemplating just how
much fun I’d had on my Lil’ Rascal over the last year and a half. So,
here’s what I came up with….and you know what? ….it goes gangbusters: Rascal
II – I added a slight bit more curve in the last 12 inches of the nose
rocker so it rails nice and tight in little nook and cranny pockets. I
put in a concave deck. It feels like your riding a skateboard and
responds super quick edge-to-edge. The caved deck also gives you this
insane feeling like you are riding “in” the board and “in“ the wave…you
gotta just try it to understand what I mean. I also shaped in four
“parabolic” (fancy for curved) channels that give extra lift, drive and
directional hold. The moontail releases the water being compressed
through the channels in a way that keeps the tail crisp and free to
break it loose when you want to. It has also been set-up to ride
as either a quad or thruster…..keeping your fin options open. In a
nutshell…..it’s more versatile, faster and looser; skates though the
flats quicker, and surfs tighter and more responsive in the pocket than
ever before.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Greased Pig: 6'2" x 19 1/2" x 2 1/2"
|
Our Price: $605.00
|
|
|

Greased Pig Designed for performance surfing in between swells. Concaves all the way through…deepest at the fins… keeps it running fast in the small stuff. Stinger swallowtail makes for more pronounced hip and pivot point to release water and increase looseness. Uses boxy rails to push back in turns. Everything the high performance shortboards do in the good waves this board does in the crud. Ridden 3-4 inches shorter and 1/4" to 1/2" wider.
Todd will specify the variation on this design during order process. Formerly know as the "LeVee".
A speed machine for chest high waves and smaller; This is the type of board that you drive like a race car….it’s going fast so all you gotta’ do is hang on and steer. It has a low entry rocker for quick paddling, ease catching waves, and increased lift in small/ flatter faced waves. The bottom has a single concave that transitions into a pronounced spiral vee that carries off the tail. This hull design carries excellent trim speed and gives the tail a very free feeling in the small stuff. The rails are fuller and boxier with a forgiving edges that are softly blended into the bottom. You can ride this board 2-3 inches shorter, 1/2” – 3/4” wider, and 1/8” thicker than your standard shortboard.
Product Specs:
Dimensions: 6'2" x 19 1/2" x 2 1/2" Tail Shape: double wing swallow tail Construction: polyester Fins: comes with Future Fins
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Greased Pig: 6'2" x 19 5/8" x 2 1/2"
|
Our Price: $645.00
|
|
|

Greased Pig Designed for performance surfing in between swells. Concaves all the way through…deepest at the fins… keeps it running fast in the small stuff. Stinger swallowtail makes for more pronounced hip and pivot point to release water and increase looseness. Uses boxy rails to push back in turns. Everything the high performance shortboards do in the good waves this board does in the crud. Ridden 3-4 inches shorter and 1/4" to 1/2" wider.
Todd will specify the variation on this design during order process. Formerly know as the "LeVee".
A speed machine for chest high waves and smaller; This is the type of board that you drive like a race car….it’s going fast so all you gotta’ do is hang on and steer. It has a low entry rocker for quick paddling, ease catching waves, and increased lift in small/ flatter faced waves. The bottom has a single concave that transitions into a pronounced spiral vee that carries off the tail. This hull design carries excellent trim speed and gives the tail a very free feeling in the small stuff. The rails are fuller and boxier with a forgiving edges that are softly blended into the bottom. You can ride this board 2-3 inches shorter, 1/2” – 3/4” wider, and 1/8” thicker than your standard shortboard.
Product Specs:
Dimensions: 6'2" x 19 5/8" x 2 1/2" Tail Shape: stinger, single wing swallow tail Construction: polyester Glassing: 4oz bottom & 4oz+4oz deck Direct size cloth Fins: comes with FCS Fins
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Accelerator: 5'11" x 18 3/8" x 2 3/16" Proxy
|
Our Price: $840.00
|
|
|

Accelerator This
board is specifically designed to make small wave performance surfing
easy. You get fast-driving speed bursts off the front foot and
hair-trigger, tail whipping warp-arcs off the back foot. A wider nose
outline and low entry rocker get this board into waves quicker and blot
it down the line faster. A bendy tail rocker sweeps off the back fin
making it quick and responsive in tight rail-arcing hook-turns. An even
single concave runs through the midsection of the board making for a
“wide open sweet spot” i.e. the board wants to go even if you don’t
have your feet right in the perfect spot every time.
Product Specs:
Dimensions: 5'11" x 18 3/8" x 2 3/16" Tail Shape: rounded squash tail
Construction: proxy custom flexible epoxy Fins: FCS Fins
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Accelerator: 6'0" x 18 1/4" x 2 3/16"
|
Our Price: $605.00
|
|
|

Accelerator This
board is specifically designed to make small wave performance surfing
easy. You get fast-driving speed bursts off the front foot and
hair-trigger, tail whipping warp-arcs off the back foot. A wider nose
outline and low entry rocker get this board into waves quicker and blot
it down the line faster. A bendy tail rocker sweeps off the back fin
making it quick and responsive in tight rail-arcing hook-turns. An even
single concave runs through the midsection of the board making for a
“wide open sweet spot” i.e. the board wants to go even if you don’t
have your feet right in the perfect spot every time.
Product Specs:
Dimensions: 6'0" x 18 1/4" x 2 3/16" Tail Shape: squash tail
Construction: polyester Fins: FCS Fins
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Accelerator: 6'0" X 18 3/4" x 2 1/4" Proxy
|
Our Price: $755.00
|
|
|

Accelerator This
board is specifically designed to make small wave performance surfing
easy. You get fast-driving speed bursts off the front foot and
hair-trigger, tail whipping warp-arcs off the back foot. A wider nose
outline and low entry rocker get this board into waves quicker and blot
it down the line faster. A bendy tail rocker sweeps off the back fin
making it quick and responsive in tight rail-arcing hook-turns. An even
single concave runs through the midsection of the board making for a
“wide open sweet spot” i.e. the board wants to go even if you don’t
have your feet right in the perfect spot every time.
Product Specs:
Dimensions: 6'0" X 18 3/4" x 2 1/4" Tail Shape: squash tail
Construction: proxy custom flexible epoxy Fins: Future Fins
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Rascal II: 5'3" x 19" x 2" Proxy
|
Our Price: $755.00
|
|
|

Rascal II Yes,
you guessed correctly; the Rascal II is an offspring of the original
Lil’ Rascal. Don’t worry, it’s not meant to replace the trusty, tried
and true design of the original Rascal…. It started as just some
thoughts…..ideas for a new board design after contemplating just how
much fun I’d had on my Lil’ Rascal over the last year and a half. So,
here’s what I came up with….and you know what? ….it goes gangbusters: Rascal
II – I added a slight bit more curve in the last 12 inches of the nose
rocker so it rails nice and tight in little nook and cranny pockets. I
put in a concave deck. It feels like your riding a skateboard and
responds super quick edge-to-edge. The caved deck also gives you this
insane feeling like you are riding “in” the board and “in“ the wave…you
gotta just try it to understand what I mean. I also shaped in four
“parabolic” (fancy for curved) channels that give extra lift, drive and
directional hold. The moontail releases the water being compressed
through the channels in a way that keeps the tail crisp and free to
break it loose when you want to. It has also been set-up to ride
as either a quad or thruster…..keeping your fin options open. In a
nutshell…..it’s more versatile, faster and looser; skates though the
flats quicker, and surfs tighter and more responsive in the pocket than
ever before.
|
|
 |
 |
 |
 |