Proctor Custom Flexible Epoxy version 2.0

- Stronger than before, lighter than before, with an even more responsive/ longer lasting flex memory -

Made from materials designed for the highest performance surfing possible – utilizes specific flex patterns to increase the board’s torque through turns.
Stronger than the molded boards (i.e. Boardworks, Surftech, etc…)
Lighter than traditional p/u boards (polyurethane)
Custom designed…no pop-outs.
Now with unlimited custom graphics options.

The Proxy….definition. – Custom epoxy surfboard that matches the flex and performance advantages of a polyester board with strength that surpasses the molded pop-out boards.

This is our latest development in the flexible epoxy series.
We begin with an ultra-lightweight epoxy “fusion Core” for the shaped blank - a uniquely formulated eps that has been fused under higher pressures to achieve greater compression strength and less ‘worm holes’ (i.e open pores typical with standard eps foams. These open pores, or worm holes add unnecessary weight due to water or resin absorption into the blank.) The “Fusion Core” does not suck in water, or bubble or delaminate over time like other custom epoxy core materials are prone to do.

I custom shape and design each board on the DSD surfboard cad design program.

This allows me to use my most proven shapes to further customize the perfect board for each surfer. Through personal discussion and interaction, I am able to determine each surfers’ height, weight, experience, the type of waves they surf, and the direction they want to take their surfing. I have always believed that plain old communication is an integral part of the design process.

The glassing is done with premium grade S-glass (the best fiberglass for yielding the highest strength-to-weight surfboards). Strategically placed flex points, or hinges are added at this stage as well. We are offering two performance enhancing upgrades to the new PROXY line….I’m calling this the Titanium Series. Upgrades include: (1) reinforced carbon-hinge flex tail and/ or (2) Kevlar deck compression patch.

The epoxy resin used in the process is also uniquely formulated to have more elongation, or flex than is typically characteristic of most epoxies. This is very important to how a board rides.

The best surfboards flex and recoil back out of turns…..

they flex lengthwise as well as side-to-side along the board….this is the “spring”, the “life” that you feel in a magic board. No matter how great the shape of a board may be, you kill it if you build it so it rides stiff and rigid.

Each board is made from start to finish here in our Ventura factory.

This allows me and the Proctor Surfboards crew to ensure that the highest level of attention and quality is put into every board.

I can tell you’re a perfectionist when you shape a board,
because every board I’ve had from you has been perfect.

Danny Estes, 5′11″, 175 lb., Ventura, CA
2nd Place at Revolution Surf Shop's Hueneme contest on his Greased Pig

Tommy O'Brien, 2009 Vans Pier Classic, custom Greased Pig

the trip was awesome and the new sticks were great.

we had some freak swells roll into the island area and found ourselves among some decent surf for most of the trip.

I miss the island so much already and am planning to
go back within a couple weeks.

if possible can you send some proctor stickers our way?
the bigger the better.

Todd, here is my feedback on the 6’4” LeVee Flexible Epoxy. By the way, got the extra fin screws from you today. Thank you for excellent customer service.

Todd, took delivery of the 6’4” LeVee and let it cure just as you instructed. Here is my comments.

I found the LeVee to be generally very fast and highly maneuverable. The most satisfying thing I can say about the board is that it is very responsive in the tube or any portion of the wave when it became a steep vertical face. That alone made me very happy, as my ability to stay in the tube is somewhat mediocre at best. Also, getting bounced off the bottom on a bad shoulder makes one generally skittish about getting hammered by the lip. The board paddles acceptably well for such a small board. It catches waves well.

This flexible epoxy construction really seems to work.

I can actually feel the board loading under (flexing) on the bottom turn, and then when it releases the flex, feeling the “spring” spit me out of the turn.

That part is really unique to my experience. Kinda like skiing or snowboarding.

It seems durable under my rough handling. It definitely springs back with energy, which is something I have never dealt with before (will take some getting used to, but that is a good thing!).

This board shape and the construction rates a 10 – 10, 10 being best. Thanks for a great product. I look forward to using the flexible epoxy 7’2” West Peak/Big Chief on my overseas trip this year.

I can only imagine what a really good surfer must be able to do with this shape and this construction. This is a quality product.